Recumbent Riders Social Club

A Recumbent Trikes & Cycles Forum
Home­Calendar­Gallery­FAQ­Search­Register­Log in
Post new topic   Reply to topicShare | 
 

 Taiwanese no-name

View previous topic View next topic Go down 
AuthorMessage
Nightturkey
Actionbent Moderator



PostSubject: Taiwanese no-name   Tue Jan 06, 2009 12:40 pm

I bought my entry-level made-in-Taiwan SWB online just because I thought it looked cool. It's fun, and generates lots of grins and waves from folks in town. The trailer I bought with it slows me down somewhat, especially on the uphills, but it gives me a place to put my lunch bag when I commute to work. If I can figure out how to post a picture of it, I'll post one.
Back to top Go down
Admin
Admin
Admin



PostSubject: Re: Taiwanese no-name   Thu Jan 08, 2009 12:09 pm

Nightturkey wrote:
I bought my entry-level made-in-Taiwan SWB online just because I thought it looked cool. It's fun, and generates lots of grins and waves from folks in town. The trailer I bought with it slows me down somewhat, especially on the uphills, but it gives me a place to put my lunch bag when I commute to work. If I can figure out how to post a picture of it, I'll post one.


You say you bought my entry-level made-in-Taiwan SWB was it an Action Bent. Another ? what type of trailer are you pulling.

_________________
recum Bacchetta 700c...Catrike Speed...Rans Formula recum
Back to top Go down
Nightturkey
Actionbent Moderator



PostSubject: Re: Taiwanese no-name   Fri Jan 09, 2009 12:47 am

No, it's not an ActionBent. The company I bought it from is a web-based company called Recumbentusa.com, based in Miami, FL. They sell a lot of their stuff on eBay. The trailer is from the same company. I love the bike and the trailer is quite handy; the company was pretty easy to deal with and shipped the bike and trailer pretty quickly; the only negative thing I would say about the experience is that the bike was shipped mostly unassembled (as one might expect), and there were NO instructions with it (to be fair, they warned potential buyers of that fact up front). I had to go by the promotional photos from their website. Fortunately it wasn't too terribly difficult, even for someone like me who had never assembled a bike before. Although the bike has a fair amount of "Made in Taiwan" feel to it, for a pretty low-priced introduction to the world of 'bent riding I would certainly give it a thumbs-up. Once I got it put together and started learning how to ride it, it took me about four days to get from "Oh my God, I'm going to Die!!!" to "Hey, this is a real blast!" It's my "ride for fun" bike.


Last edited by Nightturkey on Fri Jan 09, 2009 1:22 am; edited 2 times in total (Reason for editing : finally figured out how to insert the pic! woo-hoo!)
Back to top Go down
digitalmouse




PostSubject: Re: Taiwanese no-name   Wed Jan 14, 2009 10:07 am

Trailers are great for pulling big loads, but if all you are carrying is lunch to work, you can get bags that mount behind the back of the seat. Like these:




http://www.calhouncycle.com/ProductCart/pc/viewCategories.asp?idCategory=14
and
http://www.hostelshoppe.com/cgi-bin/search.pl?category=200500

have all sorts of bags to check out.
Back to top Go down
Nightturkey
Actionbent Moderator



PostSubject: Trailers and stuff   Wed Jan 14, 2009 10:15 am

Thanks for the links, D'Mouse. I'm always grateful for more resources. Fact is, I do tend to carry a fairly good amount of stuff when I go to work, especially when the weather's warm - I need to carry warm clothes (I work in a meat-processing plant where the temp is always 38 degrees), a supply of water (the weather here in july and August can top the triple-digit mark), and assorted other stuff. Of course, the trailer isn't permanently attached to the bike, it has quick-release clips so I can ride without it or attach it to my Peugeot upright for trips to the grocery store.
Back to top Go down
Peder Torgersen
Recumbent Enthusiast
Recumbent Enthusiast



PostSubject: Re: Taiwanese no-name   Mon Jan 19, 2009 7:43 pm

Nightturkey wrote:
No, it's not an ActionBent. The company I bought it from is a web-based company called Recumbentusa.com, based in Miami, FL. They sell a lot of their stuff on eBay. The trailer is from the same company. I love the bike and the trailer is quite handy; the company was pretty easy to deal with and shipped the bike and trailer pretty quickly; the only negative thing I would say about the experience is that the bike was shipped mostly unassembled (as one might expect), and there were NO instructions with it (to be fair, they warned potential buyers of that fact up front). I had to go by the promotional photos from their website. Fortunately it wasn't too terribly difficult, even for someone like me who had never assembled a bike before. Although the bike has a fair amount of "Made in Taiwan" feel to it, for a pretty low-priced introduction to the world of 'bent riding I would certainly give it a thumbs-up. Once I got it put together and started learning how to ride it, it took me about four days to get from "Oh my God, I'm going to Die!!!" to "Hey, this is a real blast!" It's my "ride for fun" bike.


Does it have a number 933? I import and sell recumbents from Taiwan and I’m also a dealer for several manufactures here in Norway. I have imported from the same company but not your model.

Peder
Back to top Go down
Online
Nightturkey
Actionbent Moderator



PostSubject: Re: Taiwanese no-name   Mon Jan 19, 2009 9:31 pm

Peder, I don't recall seeing a number 933, but I'll be glad to go and take another look - where would the number be located?
Back to top Go down
Peder Torgersen
Recumbent Enthusiast
Recumbent Enthusiast



PostSubject: Re: Taiwanese no-name   Tue Jan 20, 2009 6:43 am

Nightturkey wrote:
Peder, I don't recall seeing a number 933, but I'll be glad to go and take another look - where would the number be located?


The number might not be on the frame. These bikes are sold in different countries and can have different names. The manufacture uses numbers to identify the model but not sure if he will have the number on the frame?

Peder
Back to top Go down
Online
 

Taiwanese no-name

View previous topic View next topic Back to top 
Page 1 of 1

Permissions of this forum:You cannot reply to topics in this forum
Recumbent Riders Social Club :: Specialty Discussion :: Whats Your Style of Ride :: SWB-
Post new topic   Reply to topic